GP-GC

Applications & Specific Features

  • Multiple burner, appliances or service tanks supplied with one GP pressure unit.
  • Appliances installed at different heights.
  • Modulating burners when using the Inpro Oil Burner Inlet Assembly (see Datasheet).
  • Oil Supply installation using ‘dead leg’ pipework. GP unit does not need external controls.
  • GP units operate on an internal pressure switch only pumping fuel when required.
  • Pressure regulators may be required at oil inlet to burners/appliances.
  • Limited suction lift may require GP unit to be sited near the oil tank.

Accessories and adaptations

  • Free voltage relay output to control from centralised Building Management System, in kit 3, 4 or 6 signals (2-thermal, motors 1 or 2 ON, low pressure and Leak safety ON).

  • GSM alarm system by SMS messages, or connection to modem.

  • Adaptation of Pressure Group for high pressure, working conditions of up to 6 Kg/cm2

  • Leak collector trays with infrared detectors (standard in GP-800 and GP-1500).

  • Modifications to adapt to specifically regulated environments with tropicalised equipment or ATEX.

  • Solenoid valv

    MODEL GP-2200 NT
    GP-2200 GE
    GP-3200 NT
    GP-3200 GE
    GP-4200 NT
    GP-4200 GE
    GP-6500 NT
    GP-6500 GE
    GP-8500 NT
    GP-8500 GE
    GP-12000 NT
    GP-12000 GE
    FLOW l/h 2200 3200 4200 6500 8500 12000
    CONNECTION TO THE
    HYDRAULIC CIRCUIT
    (Ø THREAD / Ø mm)
    SUCTION 1” F 1” 1/2 F 1” 1/2 F 2” F 2” F 2” F
    DRIVE 3/4” F 1” F 1” 1/4 F 1” 1/2 F 1” 1/2 F 2” F
    POWER SUPPLY VOLTS 230/400
    tri-phase
    230/400
    tri-phase
    230/400
    tri-phase
    230/400
    tri-phase
    230/400
    tri-phase
    230/400
    tri-phase
    MOTOR POWER C.V. 2 2 3 4 4 5,5
    KW 1,5 1,5 2,2 3 3 4
    MAX. PRESSURE kg/cm2 3,5 3,5 3,5 3,5 4 4
    SAFETY VALVE OPENS AT: kg/cm2 4,5 4,5 4,5 4,5 4,5 4,5
    PIPPING SUCT/PRES 1½” / 1” 2” / 1¼” 2½” / 1½” 2½” / 1½” 3” / 2” 3” / 2½”
    MOTOR PROTECTION IP 55 55 55 55 55 55

    - Sound Level: 60 dB (A)