GP-30 IP-20

Applications & Specific Features

  • Multiple burner, appliances or service tanks supplied with one GP pressure unit.
  • Appliances installed at different heights.
  • Modulating burners when using the Inpro Oil Burner Inlet Assembly (see Datasheet).
  • Oil Supply installation using ‘dead leg’ pipework. GP unit does not need external controls.
  • GP units operate on an internal pressure switch only pumping fuel when required.
  • Pressure regulators may be required at oil inlet to burners/appliances.
  • Limited suction lift may require GP unit to be sited near the oil tank.
MODEL GP-30 NW GP-30 GEW
FLOW l/h 30 30
CONNECTION TO THE
HYDRAULIC CIRCUIT
(Ø THREAD / Ø mm)
SUCTION 10 10
DRIVE 3/8” F 3/8” F
POWER SUPPLY VOLTS 230 single-phase 230 single-phase
CONSUMPTION AMPS 1,38 1,38
MOTOR POWER C.V. 1/6 1/6
MAX. PRESSURE kg/cm2 3,5 3,5
SAFETY VALVE OPENS AT: kg/cm2 4 4
SOUND LEVEL dB (A) 58 58
MOTOR PROTECTION IP IP-20 IP-20
DIMENSIONS (mm) W x H x D 240 x 330 x 205 800 x 460 x 250
APPROX. WEIGHT Kg. 6,4 21