FP N/GE FUEL TRANSFER SKID TO DAY TANKS

Applications & Specific Features

  • Main tank to daily service tank oil transfer.
  • Oil supply to one or multiple generators.
  • Installations with large height differences between main storage and daily service tanks.
  • Any oil supply for ‘tank to tank’ automated by a signal from the daily tank level switch to the FP unit.
  • Special FP units available for aggressive or heated non standard fuels.

Accessories and adaptations

  • Oil failure control system, to protect gears running with an empty tank.
  • Free voltage relay output to control from centralised Building Management System, in kit 3, 4 or 6 signals (2-thermal, motors 1 or 2 ON, low pressure and Leak safety ON).
  • GSM alarm system by SMS messages, or connection to modem.
  • Adaptation of Pressure Group for high pressure, working conditions of up to 4,5 Kg/cm2
  • Leak collector trays with infrared detectors (standard in FP 240 and above)
  • Modifications to adapt to specifically regulated environments (tropicalised equipment or ATEX.)
  • Solenoid valves with flow limiters, to automate filling in supply tanks for electrical generators.
  • Soundproof sheet cabinets with UNE-25 poly-pyramid foam and lock. Manufactured with no back and made-tomeasure for each Pressure Group model.
  • Assembly of Pressure Groups in IP-55 cabinets for outdoor installation wi
    MODEL FP 10 FP 23 FP 41 FP 90 FP 120 FP 240 FP 360 FP 570
    MAX. FLOW l/h 100 260 460 900 1400 2100 3400 5300
    SUPPLY VOLTAGE VOLT 400* 400* 400* 400 400 400 400 400
    MOTOR POWER KW 0,25 0,25 0,25 0,55 0,55 2,2 3 3
    CV 1/3 1/3 1/3 3/4 3/4 3 4 4
    MOTOR r.p.m 1400 1400 1400 1400 1400 1400 1400 1400
    CONNECTION TO THE HYDRAULIC CIRCUIT (Ø THREAD / Ø MM) SUCTION 1/2” F 1/2” F 1/2” F 1” F 1” F DN 32 DN 40 DN 40
    DRIVE 1/2” F 1/2” F 1/2” F 1” F 1” F DN 32 DN 40 DN 40
    OVERPRESSURE 1/2” F 1/2” F 1/2” F 3/4” F 1” F DN 32 DN 40 DN 40
    SOUND LEVEL dB (A) 58 58 58 58 58 58 58 58
    MOTOR PROTECTION IP 55 55 55 55 55 55 55 55
    - (*) There is a 230 single-phase version power supply version (W) - For other capacity and mediums, please consult. - Threaded Flanges DIN 2566