FP N/GE BIO

Applications & Specific Features

  • Main tank to daily service tank oil transfer.
  • Oil supply to one or multiple generators.
  • Installations with large height differences between main storage and daily service tanks.
  • Any oil supply for ‘tank to tank’ automated by a signal from the daily tank level switch to the FP unit.
  • Special FP units available for aggressive or heated non standard fuels.

Accessories and adaptations

  • Special non –ferrous metal free versions upon request.
  • Standard motor power ready for viscosities till 38mm2/s (40ºC). For other, please consult.
  • Oil failure control system, to protect gears running with an empty tank.
  • Free voltage relay output to control from centralised Building Management System, in kit 3, 4 or 6 signals (2-thermal, motors 1 or 2 ON, low pressure and Leak safety ON).
  • GSM alarm system by SMS messages, or connection to modem.
  • Adaptation of Pressure Group for high pressure, working conditions above 4,5 Kg/cm2.
  • Leak collector trays with infrared detectors (standard in RL 4 and above).
  • Modifications to adapt to specifically regulated environments (tropicalised equipment or ATEX).
  • Solenoid valves with flow limiters, to automate fi
    MODEL FP 10 FP 23 FP 41 FP 90 FP 120 FP 240 FP 360 FP 570
    MAX. FLOW l/h 100 260 460 900 1400 2100 3400 5300
    SUPPLY VOLTAGE VOLT 400* 400* 400* 400 400 400 400 400
    MOTOR POWER KW 0,25 0,25 0,25 0,55 0,55 2,2 3 3
    CV 1/3 1/3 1/3 3/4 3/4 3 4 4
    MOTOR r.p.m 1400 1400 1400 1400 1400 1400 1400 1400
    SECURITY VALVE OPENS AT bar 4,5 4,5 4,5 4,5 4,5 4,5 4,5 4,5
    CONNECTION TO THE HYDRAULIC CIRCUIT SUCTION 1” F 1” F 1” F DN 32 DN 32 DN 50 DN 50 DN 50
    DRIVE 1” F 1” F 1” F DN 32 DN 32 DN 50 DN 50 DN 50
    OVERPRESSURE 3/4” F 3/4” F 3/4” F 1” F 1” F DN 40 DN 40 DN 40
    MOTOR PROTECTION IP 55 55 55 55 55 55 55 55
    (*) Also available in 230 single phase versions (W/WD= 230 V. single phase version; D= 400 V. triphase versions). - For other capacity and mediums, please consult. - ZW: Two pumps versions 1)For viscosities till 38 mm2/s (40ºC)