ATAM and CAG+
TECHNICAL FEATURES
The CAG+ control system can manage 1, 2 or 3 filling areas depending on the configuration.
The display shows the level of daily tanks, the status of pumps, valves, etc… giving the possibility of performing either manual fillings or automatic
fillings, well as different maintenance tests, essential feature to have always those backup installation ready to enter into force.
It consists of a touch screen 5.7” monochrome with Mod Bus communication capability with SCADA. Color screen, TCP-IP communication protocol
are also available as additional requirement.
TECHNICAL SPECIFICATIONS
-
Voltage: 230 V
-
RCBO (Residual Current Breaker with Overcurrent): 40 A
-
MCB (Mains Circuit Breaker).: 40 A
-
Pump control (depending on project)
-
Maneuver (according to project)
-
Tanks control (according to project)
-
Solenoid (according to project)
| MODEL | FP 10 | FP 23 | FP 41 | FP 90 | FP 120 | FP 240 | FP 360 | FP 570 | |
|---|---|---|---|---|---|---|---|---|---|
| MAX. FLOW | l/h | 180 | 300 | 450 | 700 | 900 | 1200 | 1500 | 2100 |
| MOTOR POWER |
V | 400 | 400 | 400 | 400 | 400 | 400 | 400 | 400 |
| KW | 0,25 | 0,25 | 0,25 | 0,33 | 0,55 | 0,55 | 0,55 | 1 | |
| MOTOR | r.p.m | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 | 1400 |
| CONNECTION TO THE HYDRAULIC CIRCUIT |
SUCTION | 1/2” F | 1/2” F | 1/2” F | 3/4” F | 3/4” F | 3/4” F | 1” F | 1” F |
| DRIVE | 1/2” F | 1/2” F | 1/2” F | 3/4” F | 3/4” F | 3/4” F | 1” F | 1” F | |
| OVERPRESSURE | 1/2” F | 1/2” F | 1/2” F | 3/4” F | 3/4” F | 3/4” F | 1” F | 1” F | |
| SECURITY VALVE OPENS AT: |
bar | 4,5 | 4,5 | 4,5 | 4,5 | 4,5 | 4,5 | 4,5 | 4,5 |
| SOUND LEVEL |
dB (A) | 58 | 58 | 58 | 58 | 58 | 58 | 58 | 58 |
| MOTOR PROTECTION |
IP | 55 | 55 | 55 | 55 | 55 | 55 | 55 | 55 |
- Produced and tested under DIN 12.514-1 standard